12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)
$45.00 - $55.00
Our CrossBar pads combine security and protection with a soft foam core and an anti-slip surface that holds onto your gear. Sectioned hook-and-loop closures are designed to secure around roof rack attachment points and accessories to get a more customized fit for your vehicle. - Foam padding protects boards and boats from damage - Anti-slip material helps keep your gear in place - Sectioned hook-and-loop attachments fit easily around roof rack towers and accessories - Fits most SUPs and fishing kayaks - Fits our CoreBar and JetStream crossbars, factory crossbars, and most other aerodynamic crossbars
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty
The two-bike EXO DoubleUp attaches directly to the EXO SwingBase, or to the second tier EXO TopShelf, allowing room for an EXO GearLocker or EXO GearWarrior below. Either way, it's super-easy access that accommodates anything you're riding—fat tires to road bikes and everything in between. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Carries 2 bikes up to 50 lbs. each when mounted on EXO SwingBase - Carries 2 bikes up to 40 lbs. each when mounted on EXO TopShelf - Tool-free, locking SpeedKnobs attach and lock EXO DoubleUp to EXO SwingBase or TopShelf - Use SKS Lock cores included with EXO SwingBase or EXO TopShelf for added bike security - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 37.15 lbs. - Dimensions: L 26.60 in x W 72.00 in x H 7.00 in - Limited Lifetime Warranty
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in
Double your hitch capacity with a second tier of super-accessible storage with the EXO TopShelf. Whether you're cycling and camping, skiing and hiking or simply needing to double your load, the EXO TopShelf can mix-and-match EXO accessories to make any adventure easier. - Attaches to EXO SwingBase to create a second level on your EXO Hitch system - Rotates 180 Degrees relative to EXO SwingBase for easy access to gear on lower level or to set-up base camp mode - Accessories install in seconds using the tool-Free EXO Cleat system with locking SpeedKnobs - Included HitchLock locks EXO TopShelf to EXO SwingBase - Includes 2 extra SKS locks cores for use with EXO accessories - Includes a jack stand for base camp mode set-up - Quick and easy install and removal - Limited Lifetime Warranty - Requires EXO SwingBase Product Specs: - Weight: 33.50 lbs. - Dimensions: L 31.00 in x W 25.00 in x H 26.60 in - Limited Lifetime Warranty
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
Now the family bikes can ride in style. The FullSwing has all the bells and whistles, from new ZipStrips to fully padded arms. It also swings away with one touch, for easy access to your car whenever you need. Holds up to four bikes. - Swings away from car with bikes loaded to provide easy access to rear of vehicle - Quick and easy assembly - Tool-free installation with locking SpeedKnob - AutoPin automatically positions and secures rack to the hitch and receiver - Zero-hassle ZipStrips quickly secure bike to rack - Fully padded arms for the ultimate in bike protection - Arms fold down when not in use - SKS Locks included; locks racks and bikes - Carries up to 4 bikes - 4 bikes. Total weight, 150 lbs. Maximum bike weight 40 lbs each. - Available: TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 56.00 lbs. - Dimensions: L 43.50 in x W 26.00 in x H 17.50 in - Limited Lifetime Warranty
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
$199.00 - $219.00
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to four mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 4 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Compatible with the sold separately BackSwing - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 65.00 lbs - Dimensions: L 22.00in x W 46.00in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration. PRODUCT DETAILS - Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space - Securely supports most road, mountain, kids, and cruiser bikes by the handlebar - Fully padded cradles protect your handlebars, including carbon bars - Rotating rear wheel cup fits a wide range of wheelbases up to 50" - Accommodates bikes up to 37.5 lbs. each - Holds 20"-29" tires up to 5" wide - Add your own bike lock to the integrated lock loop for greater bike security - Foot-operated tilt mechanism makes it easy to access the rear of the vehicle. - Dual cradle retention stabilizes and protects bikes from one another. - HitchLock included - Built-in bottle opener—cheers! - Fits 2" hitch receivers only - Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only) - Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter - Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly) PRODUCT SPECS - Weight: 73.00 lbs.
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.
Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks
Secure, sleek, and simple to use, the HighRoad is Yakima's newest premium upright bike mount. The adjustment-free hoop, with its TorqueRight tightening knob, loads a variety of bikes quickly and easily. The HighRoad secures the bike by the wheels for ultimate bike protection and the low-profile design minimizes hatch interference. Universal mounting hardware fits most roof racks. - New wheel hoop fits 26" to 29" wheels and tires from 23mm to 4.0" with no adjustment needed - New integrated TorqueRight knob quickly and easily secures the bike with precision - Requires no wheel removal and makes no contact with the bike frame—a great option for carbon fiber bikes and custom paint jobs - Sleek, low-profile tray minimizes hatch interference - Tool-free, universal mounting hardware fits most roof racks - Add your own bike lock to the integrated lock loop for additional bike security when your vehicle is parked - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks (2) to the included TailWhip cable to secure your bike and mount to your roof rack (sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 18.00 lbs. - Dimensions: L 56.00 in x W 9.50 in x H 4.50 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Our new premium fork mount, the low-profile HighSpeed, is streamlined, strong, and versatile. It easily transports mountain, road, and fat-tire bikes and fits both quick release and thru axles. Bikes are secured using the new and easy-to-use TorqueRight knob for a precise and strong hold. The sleek and stylish HighSpeed tray is designed for maximum hatch clearance. Universal mounting hardware fits most roof racks. - Securely carries a variety of bikes including road, mountain and up to 5" fat-tire bikes - Fits Yakima round, square, factory, or aerodynamic bars - Seamlessly carries both quick-release (9mm) and thru-axle bikes (12mm, 15mm, 20mm) - New TorqueRight knob quickly and easily secures the bike with precision. - Sleek, low-profile tray minimizes hatch interference and accommodates tires up to 5" wide - Tool-free, universal mounting hardware fits most roof racks - Carry quick-=release 9 x 135mm fat bike with the Optional Fat Bike Adapter Kit (sold separately) - Easily convert to integrate with T-Slot crossbars with the addition of a SmarT-Slot Kit - Add SKS Locks to the TailWhip cable and crossbar attachment to secure your bike and mount to your roof rack. For additional security add a lock to the TorqueRight knob. (SKS sold separately) - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 9.60 lbs. - Dimensions: L 54.50 in x W 9.00 in x H 4.75 in - Minimum Crossbar Spread 18.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy-to-reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch-mounted tray rack that loads quickly and carries two bikes without frame contact - Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Carry four bikes – just add the HoldUp EVO +2
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System. - Comes with 2 Crossbars and 4 Endcaps - Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss internal support engineering adds serious strength for minimal weight - T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow - Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof - Streamline crossbars are compatible with any StreamLine Tower - Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams - Find the right bar style and length to fit your needs - Compare four crossbar styles and features to learn more
Page 1 of 9 Next page