Skip to main content
Rent Now

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Hydration

$41.00
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
$74.95
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
$64.95
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
$64.95
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
$69.95
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$59.95
Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty
$59.95 - $64.95
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
$102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$64.95
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
$52.95
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
$13.95
Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
$154.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
$79.95
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
$14.95
High-performance cage at a low price point! Large area bottom hook supports large bottles with Side cutouts to enable fast bottle withdraw and entry. High-performance cage at a low price point! - Large area bottom hook supports large bottles - Extra sturdy high resistance techno polymer design - Made in Italy with the finest Italian quality - Pair with the hyper-reflective Cool Shot insulated bottle (sold separately) Grip Force - Approx 4lbs grip force Ideal Uses - Road - Triathlon (Aerobar and Frame)
$24.95
B-RAD Everywhere Base 2
$29.95
B-RAD Everywhere Base 3
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.
$60.00
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$50.00
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
$25.00
Fancy up that bottle cage with a fresh new water bottle from Whisky Parts Co. This insulated 23-oz. bottle with a MoFlo cap makes instant refreshment possible! - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort
$88.00
- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams
$9.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$25.00
These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.
$229.95
FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.
$249.95
HAJKER is a great waterproof adventure daypack, with a roll top opening and plenty of smart storage solutions. The pack is made for highspeed activities and is equipped with our bounce free No Dancing Monkey 2.1 harness system and waist support belt that makes the pack stay put on your back without cramping your style. - Zero bounce with No Dancing Monkey 2.0 + Snug Me – Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit. - 2-in-1-The waist belt can be used on its own, perfect as a lightweight hip-pack for short rides - Waterproof – Roll top opening to keep your gear safe from all kinds of weather. - 30L of total storage – fit everything you need for a full day of adventure WATERPROOF HIKING DAYPACK FOR THE BIG ADVENTURES The Hajker is the optimal hiking day pack with a big 30L main compartment with a roll top and an inner dry sack, waterproofing your gear for all kinds of weather. Store the stuff you need quick access to in the two zippered side pockets and compress it all together from the outside to get slimmer profile and a stable backpack that doesn’t bounce when you are out exploring, climbing, or running in the roughest terrain. The waist belt secures the lower part of the backpack and can also be detached and used on its own, like a hip-pack. You also got a helmet carry system that detachable and stored in a pocket when not in use. The pack also comes with an insulated water bladder pouch if you ever want to add a hydration bladder with the pack (bladder not included).
$219.95
SHRED is the high-end performance daypack with an outstanding comfort fit that you bring to your favorite freeride MTB adventures. The pack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me harness system and waist support belt that makes it a super smooth biking backpack that will stay put without cramping your style, even when going downhill or on crazy terrain. - Zero bounce with No Dancing Monkey 2.0 + Snug Me-Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - 25L storage to fit all your gear and tools. - NDM Buckle-Technical buckle for a more secure closure and a better fit ZERO BOUNCE ON THE FREERIDE MOUNTAINBIKE TRAILS With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the No Dancing Monkey™ 2.0 + Snug Me harness you’re going to get the best fitting bike backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system and armor attachment points, makes this MTB backpack perfect for your trail or enduro MTB adventure. PACK YOUR GEAR The SHRED 25 has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles. We even threw in a microfiber cleaner tissue… we thought of everything! Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps. You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style, important on a mountain bike backpack.
Page 1 of 7 Next page